PDA

View Full Version : MEFI5 Can Bus error



Tom B.
09-01-2021, 12:23 AM
In the MEFI 5 system does anyone what the [#220] error represents?

In-Tech
09-01-2021, 05:42 AM
I don't know what #220 means, any better description? Is this code coming up with the boat harness or a bench harness?

Tom B.
09-07-2021, 02:45 AM
17046

Tom B.
09-07-2021, 02:46 AM
Here is a screen shot of what I am dealing with. I've been trying to upload this for a week.

In-Tech
09-07-2021, 04:13 AM
I asked a specific question and still don't have an answer. Put a 120 ohm resistor across CAN + and - also known as a CAN termination resistor :rolleye:

Tom B.
09-07-2021, 05:24 AM
I asked a specific question and still don't have an answer. Put a 120 ohm resistor across CAN + and - also known as a CAN termination resistor :rolleye:

I never saw the question. I would have done it directly. I will do it asap. I couldn't do anything on this site for a week. Every time I attempted to post, i got the message asking me if I wanted to leave the site, and could not put the post up. Thank you for sticking with me during this debacle.