Looking for a bin mask 1987 4.3 monte Carlo

[efi111]

Does anyone the mask ID of an 87 4.3 ? its the 1227746

[dave w]

Apparently the gearhead-efi OBD1 library does not have definition $41 for the 1227746 ECM.

Perhaps converting to a different ECM like the 1227747 is an option?

Perhap$ purchasing the $41 definition file from TunerCats is an option? http://www.tunercat.com

dave w

[stew86MCSS396]

:thumbsup:'85 Caballero had ECM 1226868 and a 1227747 was pin for pin swap.

[efi111]

thank you everyone for replying!

[efi111]

Apparently the gearhead-efi OBD1 library does not have definition $41 for the 1227746 ECM.

Perhaps converting to a different ECM like the 1227747 is an option?

Perhap$ purchasing the $41 definition file from TunerCats is an option? http://www.tunercat.com

dave w


I am using Tunerpro rt , however, I went to tunercats like you suggested and paid for the $41 def file and they emailed me something but it looks like an exe file? what did i just pay for?

[dave w]

Is the zip file tnr_setup.exe?

If so, that's the TunerCats setup file. Go ahead and "run" the tnr_setup.exe

dave w

[dave w]

I am using Tunerpro rt , however, I went to tunercats like you suggested and paid for the $41 def file and they emailed me something but it looks like an exe file? what did i just pay for?

TunerCats is a software package. TunerPro is a software package. Both software packages are totally independent from one another. Tune with TunerCats or tune with TunerPro, it's an either / or choice.

dave w

[dave w]

Is the zip file tnr_setup.exe?

If so, that's the TunerCats setup file. Go ahead and "run" the tnr_setup.exe

dave w

Were you able to figure out how to use TunerCats?

TunerCats is very similar to TunerPro, except there is a cost associated with TunerCats.

TunerCats OBD1 software is $69.95, then a there is the additional cost of a TunerCats definition file of $19.95.

Unfortunately, some definition files are not available or have not be developed due to insufficient interest or popularity for TunerPro. Likely $41 has NOT been developed for TunerPro and likely never will.

dave w