Sweet! I clicked on the link which took me there, but as I reply to the newest to share the bin, it is saying I don't have the required permission to...
Edelbrocks base tuning is extremely rich out of the box and their AFR targets were insanely rich. With the cats on it, I am targeting 14.7:1 at idle...
When I bought the old girl, the previous owner had removed all the rear seating. I love that it looks like a heavy conversion van on the exterior but...
I see some clarification might be required when converting a ‘7730 V6 Memcal to V8.
1. Install jumper into '7730 V6 Memcal, no other '7730 V6 Memcal...
Thanks Dave, this is what I was looking for,I just installed a 3.9 resistor on F9 to ground that pulled the 5vdc on f9 to 2.4vdc and code 43 is gone....
I am using the moats adaptor and burt a base chip using $8D bin, the injectors are firing just won't run. It like the firing rate is off. Cyl select...